Anti-Static Class 1000 Cleanroom Air Shower Tunnel With 3
Directional Blowing
Quicky detail
External Size: 2000x3000x2300mm
internal size : 15000x2930x2000mm
Purification rank: Class1000
HEPA filter efficiency: 99.999%@0.3um
SUS nozzle: 62pcs
Blower way: three directional blowing
Air speed :>25m/s
Power: 380V/50HZ 380v/60HZ, 440V/50HZ
Introduction:
The greatest source of particulate contamination in a clean room is
the operator air shower tunnel are installed between change areas
and the clean room, the air shower enhances clean room operating
protocol by serving as a reminder to all operators that they are
entering a controlled environment, personnel should be gowning up
properly before entering the air shower, after you pass the air
shower tunnel
Applications:Pharmaceutical,Medical Device,Aerospace/Government,Health Care,semiconductor, electronics, precision manufacture,
animal labs , research labs. metal manufacture and lead industry.
operating features :
1) Material: inside is stainless steeel 304, outside is cold rolled
steel / stainless steel 304, sandwich panel 2) HEPA filter with
efficiency 99.99% up to 0.3um
3) Toughened glass for the door's window
4) Fully-automatic infrared induction blowers and showers
5)Two emergencys inside and outside, it could stop the working if
need.
6) LED display
7) Adjustable range: 0 - 99s
8) Doors will close automatically when activated
9) Stainless steel nozzle on two sides, it's more effieciency to
blow.
10) The air velocity is greater than 25m/s
11) Low noise level
12) Arc corner 100-rank static state, patented product
13) customized designe is available
KEL-AS2000T-3L Air Shower Tunnel |
MODEL | KEL-AS1590T-3L |
External size (mm) (WXDXH) | 2000x3000x2300mm |
Work zone (mm) (WXDXH) | 1500x2930x2000mm |
Persons per cycle | 3 Pallet goods |
Air shower Duration | Factory set at 12 second (adjustable) |
Air shower direction | Three side blowing |
Material (Option) | 1: Entirety Sus304. 2: Entirety sus201. 3: External is steel with power coated, Internal is SUS304. 4: External is steel with power coated. Internal is SUS201. |
Control system | 1: PCL control system with LED display for the shower time. 2: The shower time from 0-99second. (Adjustable). 3: Infrared ray inductor for inside personal shower automatic. 4: Human voice prompt system. 5: with CE remark. |
The power of Fan | 380V/50HZ/750W (6 set) |
Air flow of fan(m3/h) | 1300m3/h |
Fan run (r/min) | 2800r/min |
Nozzle in stain less steel | 62 pcs |
Wind speed(m/s) | 23-29m/s |
Noise level(dB) | <62dB |
LED Fluorescent Lamp | 20wx3 |
HEPA Filter | Size(mm) | 630X630X69mm |
Efficiency | 99.99%@0.3um |
Air velocity | 1000(m3/h) |
Initial resistance(pa) | <220pa |
Pre-filter | Size(mm) | 775x380x17 |
Efficiency | 75% @ 0.5um |
Resistance(pa) | <30 Pa |
Electrical | Power supply | 380v/50Hz |
Net power(kw) | 0.75X6kw |
Customer’s design is available.
Principle:
Commodity Air shower tunnel air is supplied by the fan, flowing
into the sir plenum chamber via low efficiency filter, and then
filtered through high efficiency filter. The clean air comes out
from the air
shower nozzles (nozzle angle can be adjusted), which can
effectively remove people and
belongings attached dust. The dust will flow back into the low
efficiency air filters with air streams. The cycle achieves the
purpose of air shower tunnel.
Factory test:
All of equipment is individually factory tested for safety and
performance
in accordance with international Standards. Each unit is shipped
with a documentation outlining the tests undertaken and the units
individual results for each unit.
Factory test include:
-- functional test and visual inspection
-- electrical safety tests
-- air velocity testing
-- purification rank test (if need)
Warranty:
Our equipment is warranty for 1 year excluding consumable parts and
accessories.
All equipment is shipped with a comprehensive use’s manual complete
with a report documenting all test procedures.
Additional IO/OQ/GMP document is available upon request.
Contact our sales representative for specific warranty details or
document request.
Consumable parts illustration:
1: Pre-filter: each one should be replacement in each 6 month, but
it can refresh no more three times.
2: HEPA filter: each one should be replacement in each half and one
years.
Why you choose K-LING Company ?
Professional sales:
• We value every inquiry that you sent to us, ensure quick
competitive offer.
• We cooperate with customer to bid tenders. Provide all necessory
docuement.
• We are a sales team, with all techinical support from engineer
team
Punctual delivery time:
• Production / inspection report provide before shipment
• Shipping notice or insurance for you when your goods is shipped.
After sales service:
• We respect your feed back after receive the goods.
• We provide one year warranty after goods arrive.
• We promise all spare parts available in lifetime use.
• We care of your complain within 48hours.
Payment Term:
T/T in advance, 30% before place the order, 70% when you see copy
BL
Or 30% T/T in advance before place the order, 70% LC at sight.
