When customizing the transfer window, the following details are required to ensure that the transfer window can meet the specific use needs and environmental requirements:
1. Dimensions and specifications
Size: Specify the length, width and height of the transfer window to ensure that it can be adapted to the installation position.
Installation method: Confirm whether the transfer window is embedded in the wall or the floor installation.
Non-standard customization: If there is a special size requirement, please specify in advance.
2. Interlock function
Interlock type: Select mechanical interlock or electronic interlock. Electronic interlocking enables more advanced control functions.
Interlock mechanism: ensure that both sides of the door can not be opened at the same time to prevent air cross-pollution.
3. Material and surface treatment
Housing material: usually stainless steel or aluminum alloy, to ensure corrosion resistance and easy cleaning.
Surface coating: anti-static polyester resin and other coatings can be selected to prevent electrostatic adsorption.
4. Disinfection and purification function
Ultraviolet light: Equipped with ultraviolet light to disinfect the surface of the item, the disinfection time should be specified (usually 30 minutes).
High Efficiency Filter (HEPA) : For higher cleanliness, a HEPA filter is available.
Air shower function: For high cleanliness requirements, you can choose air shower transfer window.
5. Additional features
Walkie-talkie: equipped with walkie-talkie to facilitate communication between personnel on both sides of the transfer window.
Intelligent control: If remote control or identification function is required, intelligent control system can be selected.
6. Use the environment
Cleanliness level: According to the cleanliness level requirements of the use environment (such as class A, Class B, etc.), select the appropriate transfer window configuration.
Environmental conditions: Confirm that the transfer window is suitable for a specific environment, such as low temperature, high temperature, high humidity, etc.
7. Installation and maintenance
Installation position: Select a position that is easy to operate and does not affect the clean air flow organization.
Sealing treatment: Ensure that the transmission window and the wall are well sealed to prevent air leakage.
Maintenance requirements: Regular cleaning and maintenance, including checking UV lamps, replacing filters, etc.
8. Security and compliance
GMP compliance: Ensure that the transfer window complies with relevant industry specifications (e.g. GMP).
Safety protection: Equipped with safety protection facilities, such as guardrail, if necessary